top of page
Search
Writer's pictureDavid Garrison

DIY Guide: How to Replace Your Front Door in 5 Simple Steps


DIY Guide: How to Replace Your Front Door in 5 Simple Steps

Replacing your front door can be a great way to update the look of your home and improve its energy efficiency. While it may seem like a daunting task, with the right tools and a little bit of know-how, you can replace your front door yourself. Follow these eight simple steps to give your home a brand new entrance.


Measure and Purchase Your New Door.

The first step in replacing your front door is to measure the opening to ensure you purchase the correct size door. Measure the width and height of the opening, as well as the depth of the jamb. Take note of any obstructions, such as light fixtures or doorbells, that may need to be moved or adjusted. Once you have your measurements, you can purchase your new door from a home improvement store or online retailer. Make sure to choose a door that fits your style and budget, as well as one that is energy efficient and durable.


Remove the Old Door and Frame.

The next step in replacing your front door is to remove the old door and frame. Start by removing any trim or molding around the door frame using a pry bar or hammer and chisel. Then, use a reciprocating saw to cut through any nails or screws holding the frame in place. Carefully remove the frame and door from the opening, being sure to have someone help you if the door is heavy. Dispose of the old door and frame properly, or consider donating them if they are still in good condition.


Prepare the Opening for the New Door.

Once you have removed the old door and frame, it’s time to prepare the opening for the new door. Start by measuring the height and width of the opening to ensure that your new door will fit properly. If necessary, use a saw to trim any excess wood or drywall from the opening. Next, check the level and plumb of the opening to ensure that it is straight and even. Use shims to adjust the opening as needed, and secure them in place with screws. Finally, apply a bead of caulk around the perimeter of the opening to seal any gaps and prevent drafts.


Install the New Frame.

With the opening prepared, it’s time to install the new door frame. Start by placing the frame into the opening, making sure that it is level and plumb. Use shims to adjust the frame as needed, and secure it in place with screws. Next, install the hinges onto the frame, making sure that they are evenly spaced and level. Finally, attach the door to the hinges, making sure that it swings freely and smoothly. With the new frame installed, your new front door is ready to use!


Attach the Hinges and Hang the Door.

Once the new door frame is securely in place, it’s time to attach the hinges and hang the door. Start by positioning the hinges on the frame, making sure they are evenly spaced and level. Use screws to attach the hinges to the frame, being careful not to over-tighten them. Next, lift the door into place and align the hinges with the ones on the frame. Use screws to attach the hinges to the door, again being careful not to over-tighten them. Finally, test the door to make sure it swings freely and smoothly. Congratulations, you’ve successfully replaced your front door!





12 views0 comments

Comments


bottom of page